| Main > Main Forum |
| Two Player config in a Ms. Pacman Cab |
| << < (2/2) |
| koolmoecraig:
I think there is plenty of room if Ms. Pac Man is the same width cab as Rally-X. |
| csa3d:
I have a galaxian (relatively same style cab) and if you want a trackball, forget about buttons for player two. I went with something like this . My decision was make after mocking up some controls and standing in front of the cab with that mockup. It's the sides of the cab which make squeezing in tough, and I can see why in a super pac cab where the side are cut out, it probably works better along with the front extension. -csa |
| pcb:
--- Quote from: koolmoecraig on January 08, 2008, 02:13:48 am ---I think there is plenty of room if Ms. Pac Man is the same width cab as Rally-X. --- End quote --- With a trackball, it's really tight. You have 23" wide to get everything in. Deeper, like the SuperPac pic above look OK, but the joystick and buttons seem pretty far from the front of the panel. Here's a picture of what you may be looking for on a 'fabled white Galaga' cab. We make these all the time for customers. Best, - Mike - |
| Navigation |
| Message Index |
| Previous page |