Main > Buy/Sell/Trade - non-retail
WTB: Nintendo Sanyo Vertical Mounting Hardware
(1/1)
shilmover:
Anyone have a set that they are not using?  I did make one, but I am not happy with it.
pcb:
We have reproduction mounts at www.mikesarcade.com

Best,

 - Mike -
shilmover:
Mike,

I know, but I have a hard time spending $50 plus shipping when I paid $100 for the cab.  :)  Nothing against what you are charging, its just a bit much for me. 

I am hoping someone has one for cheaper.

B
pcb:
Understood.  What I used to do is get a piece of angle iron for the bottom mount, bend a couple of 'L' brackets and use a 1" square tube all from home depot to do the same thing.  You can get away for around $20 that way.

Best,

 - Mike -
shilmover:

--- Quote from: pcb on January 04, 2008, 01:56:32 pm ---Understood.  What I used to do is get a piece of angle iron for the bottom mount, bend a couple of 'L' brackets and use a 1" square tube all from home depot to do the same thing.  You can get away for around $20 that way.

Best,

 - Mike -

--- End quote ---

Thanks.  I will try that.

B
Navigation
Message Index

Go to full version