Main > Main Forum
Got my U360's.. But Im Joystickless and my x, and y seem to be backwards also ..
fjl:
I think Windows sets joystick numbering and joystick 1 is the first joystick you connect, 2 is the second and so on. So you'd probably have to disconnect all controllers and joysticks and connect them in the order you want them, U360 being the first to connect.
fatfingers:
Or just go into the global settings of MAME and change inputs for players to be the joysticks you want.
mrclean:
--- Quote from: efjayel on December 06, 2007, 01:50:14 am ---I think Windows sets joystick numbering and joystick 1 is the first joystick you connect, 2 is the second and so on. So you'd probably have to disconnect all controllers and joysticks and connect them in the order you want them, U360 being the first to connect.
--- End quote ---
I dissconnected the N64 / NES adaptor and its working in mame now! which is good... however Im scared to reconnenct my retro-usb controllers I hope they won't over ride my U360's etc..
Another really strange thing is in MaLa its fine where my game list doesn't scroll down.. but in mamewah my list scrolls down by it self, not sure why my game list in mamewah is that sensitive.. I might just go with MaLa after all but i can't seem to get gamecreatures BLUE theme to work with any snaps/ or video previews. I also miss my "random" button that I had in mamewah can i set that in MaLa so it will randomly jump to a different game on the list ?
also looking for 1280x layout... alot of the layouts im finding are 1024x etc..
It was also said that it supports animation in the layouts, I have yet to come across one that I can try out.. Ive seen one for bubble bobble I think it was for mamewah / or atomic fe i don't remember off the screenshot archive
*By the way In game so far I really enjoy them.. been setting some hi-scores already! .. But the ball-tops seem to be unscrewing.. Ive read that I can use glue/apoxy but i don't want to do that or pliers. Or underneath something with a screwdriver.. id rather not take apart my panel again!!
LeedsFan:
--- Quote from: mrclean on December 06, 2007, 09:41:43 am ---*By the way In game so far I really enjoy them.. been setting some hi-scores already! .. But the ball-tops seem to be unscrewing.. Ive read that I can use glue/apoxy but i don't want to do that or pliers. Or underneath something with a screwdriver.. id rather not take apart my panel again!!
--- End quote ---
I had the same problem on my cabinet. I ended up using epoxy resin, which is basically a permanent solution. My 8-way sticks were mounted from underneath the panel so if I ever needed to remove them I had to take off the e-clip on the end of the shaft and remove upwards. Just an extra step to removal.
But of course you are using 360s which are much more delicate. I suppose if your mounting plates are on top of the panel then it wont matter at all if you use epoxy resin. But if the plate is underneath then I'd be very careful how you do this.
I read this thread with interest because I will be ordering 2x 360s soon for my CP project. I like how all Ultimarc interfaces are all set up for Mame. But in all the research I've done I do understand that these sticks are independent and cannot be routed through a Minipac.