Main > Main Forum

Coin Door LED's

Pages: (1/3) > >>

bent98:

I would like to replace the stock bulbs on my Happ Coin door(http://www.happcontrols.com/coindoors/40000800.htm)

with some super brights(http://www.superbrightleds.com/) question is which ones do I use and will they fit in the happ coin door sockets?


Franco:

You are after a LED bulb with a T 1-3/4 base. Happ do LED replacements for them here or you can get from form superbrights from this page.

bent98:

http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&keywords=&cart_id=8441170.24139&next=50

is that it 2nd from top???
T13 Wedge Base LED bulb
12VDC 6-LED Wedge Base bulb
measure 1 1/8 long by 1/2 inch maximum diameter (194/168 type)
Available in White, Blue, Green, Red, Amber and UV-BlackLight LED
$ 1.99

91-10WB-123R 
 Red T 3-1/4 Cluster (3)  12 vdc #161, #194

But it says 161, 194 bulb size and superbright is 194/168


Happ has 4 cluster

Franco:

I'm pretty sure the numbers are only to do with the main bulb bodys shape/size. They all have the same wedge base so they will all fit the bulb holder and there is plenty of room behind your coin inserts for the larger diameter bulbs

tomsurfnj:

I used multicolor Led from superbright model # RL5-RGB-ACC. I just taped them behind the coin slots. They look great flashing and changing color. I am going to add one under my trackball in the future.


Just remember to follow polarity.


Pages: (1/3) > >>

Go to full version