Main > Software Forum
LEDBlinky - Arcade LED Control software and Animation Editor - v8.2
Charles4400:
No LEDBlinky icon when in Hyperspin... so also no debug file.
I posted this on the Hyperspin forum and BBB and bent98 over there are trying to help me out:
http://www.hyperspin-fe.com/forum/showthread.php?t=1445
This is at the bottom of my settings.ini in Hyperspin:
[LEDBlinky]
Active=true
Path=F:\Emulators\Programs\LEDBlinky373\LEDBlinky
This is the exact path of LEDBlinky on my computer:
F:\Emulators\Programs\LEDBlinky373\LEDBlinky
It looks like there is a problem activating LEDBlinky from Hyperspin on my end then...
As a side note: I have all lights on Pac Drives (3 of them). When I first boot the computer all lights are on and stay on. If I go into LedBlinky config , all lights turn off but I can test the lights and they show any test pattern I try but if I exit config all lights are off untill reboot. I don't know if this is normal or not or important to this situation but thought I would add that.
Thanks!
bent98:
You problem is you dont have a backslash at end of path. It should look like this
Path=F:\Emulators\Programs\LEDBlinky373\LEDBlinky\
Edit your settings.ini file and add the backslash.
arzoo:
Thanks bent - I was just about to suggest that!
As for the LEDs starting ON when you first boot up - that seems to be how the Pac-Drive works. The LEDBlinky app sends an all-off command when it starts. You might want to ask Andy over at Ultimarc about this.
Charles4400:
Thanks for the replies!
I added the backslash so it looks like this in Hyperspin settings.ini:
[LEDBlinky]
Active=true
Path=F:\Emulators\Programs\LEDBlinky373\LEDBlinky\
But still nothing happens when hyperspin is launched or I play a Mame game...Did alt-tab in Hyperspin and LedBlinky is not there either.
I downloaded ledblinky again in case there was a problem with the one I dowloaded before, moved over the .ini files and still no luck...
Any other suggestions?
...Oh ande the pac drive lighhting up the buttons on computer start is no problem to me...kinda like it all lit up at the beginning! ;D
bent98:
Here is a dumb question, but did you configure LEDblinky for your setup? Have you tested ledblinky with any other FE's? It sounds like a config issue and may not be a Hyperspin issue.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version