Main > Software Forum
LEDBlinky - Arcade LED Control software and Animation Editor - v8.2
Bloodwyn:
I was able to fix the Mala crash. I scoured some of the other forum messages and saw a thread about mala crashes due to snapshots. I resized the screenshot for mutant storm and ... Wala.. no more crashes.
I still get the LEDBlinky error on exit, but Mala no longer crashes.
Bloodwyn
loadman:
:applaud:
arzoo:
--- Quote from: Yarb on March 30, 2008, 10:31:22 am ---I also am having error messages that "Mala has encountered a problem and had to shut down" about 1 time in 5. It leaves LEDBlinky running in the tray and will always repeat the message unless LEDBlinky is shut down so this could be an LEDBlinky problem?
Yarb
--- End quote ---
Yarb,
If MaLa does not shutdown normally, then LEDBlinky will remain running in the tray. It's not clear if the problem you're experiencing is related to LEDBlinky or just MaLa. One thing you can do is turn on the LEDBlinky debug log. From the config app, on the 'Misc Options' tab, check the Debug and Verbose options. Then run MaLa and try to capture a crash. You may notice slower performance with the the debug options turned on. After the crash, zip up and email or post the debug.log file in the LEDBlinky folder. Also turn off the debug options.
MaLa also generates an error log - check for that too.
arzoo
arzoo:
For those having problems with LEDBlinky and MaLa executing batch files to launch the games, try this version of the plugin.
The 'Name' field will be used in place of the 'Executable' with all spaces replaced by underscores (_). So for example, if you specify the name as 'PC Games', then LEDBlinky will see 'PC_Games' as the executable and that's what you would use to set up any custom control/color profiles.
Let me know if it solves the problem and then I'll include it with the latest release. Thanks.
Yarb:
Loadman
I will check the logs tonight, I figured it was still running because it did not shut down normally but thought it odd that the same error would occur if I did not shut LEDBlinky down manually before running Mala again. I also noticed that as long as I do not click the 'OK' button on the error message that Mala/LEDBlinky run normally and seem to work fine (Except the always on top WinXP error screen)
I am also sondering if there is a way to change what control buttons are lit upon pressing the shift key. I have a single admin button on my cab which is mapped to P and Player 2 button 8 on my iPaq so it works nicely as both pause and shift. I would like to have some controlls light when shift is held so users know which buttons to press to exit and the like.
Thanks
Yarb
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version