Main > Main Forum
Eratic/Jittery TT2 Spinner Playing Tempest
Derrick Renaud:
Did you set the sensitivity to 6% in the analog controls menu?
u_rebelscum:
Did you remap dial analog to mouse Z axis? (correct)
Or remap dial inc & dial dec to mouse Z axis? (wrong)
TheOne:
Encryptor, did you figure this out. I just installed a trackball on the X Y axis and moved TT2 spinner to the Z axis and now I am getting the same problem. the trackball works great, but now the spinner has huge backspin. Even lowering the sensitivity to 1% in the game is still not working. I downloaded the USB program to change the polling rate and tried all three options and still got nada. The spinner is the only control on Z. I just don't get it. Any help would be appreciated. Thanks. :banghead:
RandyT:
--- Quote from: TheOne on November 16, 2007, 09:51:40 am ---Encryptor, did you figure this out. I just installed a trackball on the X Y axis and moved TT2 spinner to the Z axis and now I am getting the same problem. the trackball works great, but now the spinner has huge backspin. Even lowering the sensitivity to 1% in the game is still not working. I downloaded the USB program to change the polling rate and tried all three options and still got nada. The spinner is the only control on Z. I just don't get it. Any help would be appreciated. Thanks. :banghead:
--- End quote ---
As the spinner is on the Z-Axis, you'll need to make sure that any settings for the scroll wheel under Windows are down to the minimum. Normally it is set for 3 or more "lines" per tick of the wheel, which would likely cause the problems you are seeing.
Also make sure that a recent version of MAME is being used. Earlier versions were far more sensitive on the Z axis than X and Y due to the way Windows handled the scroll wheel internally. The Z input was divided down some time ago. What version are you using?
RandyT
TheOne:
Thanks Randy. I set the mouse scroll rate to 1 line from the control panel. Still no go. I am using Mane32 v0.120.