| Main > Main Forum |
| Where do you get gears, pulleys, belts, etc? |
| << < (2/4) > >> |
| koz319:
http://www.Emotorstore.com has an OK selection of sheaves,pulleys, and vbelts. Don't even bother looking at their motors tho... :) Mcmaster and Grainger are pretty much the standard. Koz |
| SavannahLion:
--- Quote from: bfauska on November 08, 2007, 03:55:26 pm --- --- Quote from: Ken Layton on November 08, 2007, 11:01:46 am ---www.mcmaster.com --- End quote --- Would be my first reccomendation too. We order from them about once a week here at work, and the service has been great. I would also recommend Grainger, and you may want to look and see if they have a location local to you. We order from them at work also, mostly when we need to be able to pick up the part today. --- End quote --- Are they like Happs where they prefer to deal with business instead of individuals? |
| DaOld Man:
Thanks for all the input guys! Looks like most of the parts are pretty expensive. I would expect that from industrial suppliers. I was reading some posts and someone had an idea of cutting a pulley out of wood. I cant remember who said it, and I cant find the post, so I cant give proper credit. But it seemed like a good idea. Maybe rig up a router to cut a 1/4" grove in the edge of a 3/4" round piece of mdf. A 1/4" belt would ride in the groove. Also someone mentioned using a piece of bicycle chain attached to the edge of a wood disc, then have a sprocket run along it. (Actually the sprocket would push the chain, which would turn the disc). Its not that Im a tightwad (Ok, I am), but I would like to go as cheap as possible, so others on a budget can do the same. |
| solderguy1:
--- Quote from: DaOld Man on November 08, 2007, 05:56:08 pm ---Its not that Im a tightwad (Ok, I am), but I would like to go as cheap as possible, so others on a budget can do the same. --- End quote --- Nothing wrong with that, I'm still thinking of attaching a spool of fishing line to a Big Lots battery powered screwdriver (the cheapest two-direction high torque motor around). Picked up a $7 caster at Orchard Supply last week. unscrewed the axel bolt and removed the wheel, it looks like a 2x4 can be bolted there instead. Then the baseplate can be joined to the lcd monitor by using another board in between. |
| bfauska:
--- Quote from: SavannahLion on November 08, 2007, 05:11:51 pm ---Are they like Happs where they prefer to deal with business instead of individuals? --- End quote --- I Have done walk-in purchases at Grainger before with no issues. I also think that McMaster would be OK. They post prices on their websites so they don't show any preferential treatment for pricing if you're a business. We DO have an account with them, but I think they take cards too. |
| Navigation |
| Message Index |
| Next page |
| Previous page |