Main > Main Forum

Where can I find a cool illuminated power switch for my cab?

Pages: << < (2/2)

SodaPopinksi:

A couple thoughts:

Happ makes a smaller illuminated button in yellow, but it's a black bezel:

http://www.happcontrols.com/pushbuttons/5400042x.htm

Same with Seimitsu, it makes the similar looking PS-14-06, the round yellow illuminated part is 24mm

But as far as a metal/yellow illuminated button, perhaps a chrome yellow Ultralux button? But that is the size of a regular Sanwa pushbutton with a 30mm mounting hole.

http://www.ultimarc.com/ultralux.html

The Happs, Ultralux can be ordered through divemaster I'm sure, and the Seimitsu is in their cataloge and could be ordered through akihabarashop.com (I believe their new website will be up soon)

superbigjay:

Thanks to everyone who help me here!

I played a bit tonight with the switch to see how it behaves...

those switches have 5 pin
LED GND
LED 12v

the other 3 are for the switch (A,B,C)

when the switch is "released", A and C are shorted.
when the switch is "fully pressed" or "partially pressed", B and C are shorted

A partial press is the "momentary switch" behavior.  The race is long enough.  This is why they say that the switch can be used as a momentary switch.

A full press, keep the switch in the "press" state, until you press again to release it.

So I can still use the button for the PC power supply.
However, the more I think of it, the more I think I'll use that one to turn on/off the
5V connector required for the topgun recoil and led bar...

Jay  :cheers:

Encryptor:

Look through this thread. On the second page there are a couple pics of the control panel and the power button.

http://forum.arcadecontrols.com/index.php?topic=63629.40

Encryptor

Pages: << < (2/2)

Go to full version