Main > Buy/Sell/Trade - non-retail
WTB- RS422 cable for house of the dead board + speakers
(1/1)
kjoel0123:
I am looking for the rs422 cable for "house of the dead" and both speakers. See pic for details. CN2 to CN2 on schematic.
Stray_Catalyst:
If you can give me a better description of the cable, I might be able to make it for you.  I work for a company that makes custom cables, and we're familiar with RS-422.  I'm not as experienced with arcade games, and have never worked on House of the Dead - but if you can give me the names of the connectors, and a pinout diagram (or I might be able to get taht info from the drawing) I can probably help you.

Stray Catalyst
kjoel0123:
Connectors are JST females. What particular JST type I am not sure of.  Pinout diagram is located here:
http://www.seuservice.com/manuals/THOTD%20Folder/thotdhtml.STD/HODSTDWD.html

Its CN2 to CN2 on the wiring diagram.  Thanks
northerngames:
I think I am holding the cn1 cn2 in my hand and wil post some picture when my camera charge's it's to dead for a flash but i will post them soon.







hopefully there the right one's you need  :dunno
Stray_Catalyst:
The diagram you sent shows two connections - but the picture shows six.  Which one do you need?  :)  If you need one cable, JST-6 plug to JST-6 plug, you'd be better off buying the parts (http://www.digikey.com has them) and doing it yourself - we can certainly make it for you, but it'll be cheaper for you to do it.

Stray Catalyst
Navigation
Message Index

Go to full version