Main > Main Forum
Octagonal restrictor for JLW-UM-8?
Kaytrim:
bite the bullet and get some JLF sticks with the octagonal restrictor, you'll be glad you did.
bluevolume:
--- Quote from: Kaytrim on October 25, 2007, 03:40:00 pm ---bite the bullet and get some JLF sticks with the octagonal restrictor, you'll be glad you did.
--- End quote ---
Not possible. I JUST built my panel with the other joysticks, and I would have to trash the overlay to accomodate the odd size of the JLF sticks.
Kaytrim:
I am guessing that the overlay is stuck in place then? Let me see a pic of the top and bottom of the panel. Maybe I can come up with a solution.
bluevolume:
Here's the link to my project thread:
http://forum.arcadecontrols.com/index.php?topic=70295.0
The last few entires have lots of pics of the control panel.
Kaytrim:
Ok Let's see if we can save the Sabercade. Take and get the measurements from front to back screws and from side to side. Do it in millimeters. When I get home I'll check one of the JLF mounting plates that I have. If I am reading the Sawna catalog right they could be a straight swap. With the way you have them mounted using nuts and bolts as long as the mounting plates match up I don't see why you couldn't do the swap. You may even be able to use the bat tops from the JLM on the JLF shafts. LizardLick sells adapters that allow this.