Main > Main Forum

minipac loses configuration

Pages: (1/2) > >>

mlcampbe:

I had programmed my ultimarc minipac as desired and it was working for approx. 1 year. All of a sudden it seems to forget my custom settings at each machine shutdown. I have load the configuration tool, load my saved settings and program the minipac after each reboot.

Any ideas why or how to fix this?

Hoopz:

Running XP?  Look at this thread on Andy's site:

http://ultimarc.com/ipac2.html

Problem: (USB Only) Board appears not to work until WinIPAC is run every time following reboot. Yellow exclamation marks in Control Panel, Device Manager.
This is a rare Windows XP problem (fixed in Vista), and is caused by a registry error. It is suspected that this problem occurs if the board is regularly swapped from one USB port to another, or different board versions used on the same PC.
Ensure you are using the latest version of WinIPAC (March 2007) which has a permanent workaround for this problem. Installing the latest version should cure the problem with no further action needed.

Not sure if that's it, but worth a shot.

ArtsNFartsNCrafts:

Has anyone reported configuration problems with ultimarc products (ipac, minipac, etc) running on Windows2000?

mlcampbe:

I downloaded the newer winIpac and also cleaned up some old software on my machine and initial tests look better now. I am going to try it out for a few days and see. Thanks for the tip.

diverdown:


--- Quote from: HooPZ on October 22, 2007, 05:52:55 pm ---Running XP?  Look at this thread on Andy's site:

http://ultimarc.com/ipac2.html

Problem: (USB Only) Board appears not to work until WinIPAC is run every time following reboot. Yellow exclamation marks in Control Panel, Device Manager.
This is a rare Windows XP problem (fixed in Vista), and is caused by a registry error. It is suspected that this problem occurs if the board is regularly swapped from one USB port to another, or different board versions used on the same PC.
Ensure you are using the latest version of WinIPAC (March 2007) which has a permanent workaround for this problem. Installing the latest version should cure the problem with no further action needed.

Not sure if that's it, but worth a shot.

--- End quote ---




Same issues with a machine of mine - fixed following Andys advice

Pages: (1/2) > >>

Go to full version