Main > Main Forum
Need advice on monting a 27" monitor in my cocktail cab!
Pages: (1/1)
rackoon:
Well here is the deal. I have a a 27" dotronix monitor that works awesome but its just sitting on the ground beside my cocktail cab. It came in a big metal case to stack other monitors on it. I would just leave it in the box but it takes up way too much room so I took it apart to install.
The only thing holding it in place is a metal ring around the screen with half inch dog ears sticking out on the corners. Can these possible hold up the monitor with the screen facing up? Can I put some padded supports under the tube to support it? :dunno
This is the last big step in finishing my cab. Please help!
squirrellydw:
I have a billabs 27" and mine is mounted in 1" plywood by 6 bolts going through the ears
rackoon:
Is your monitor tube being held in place by just a metal ring?
Im afraid that it will fall out of the metal support. :banghead:
squirrellydw:
This is mine, it's being held by these ears.
http://www.billabs.com/bl27cb0p.htm
mccoy178:
Here is what I created for my decased t.v.:
http://forum.arcadecontrols.com/index.php?topic=50889.msg526080#msg526080
Pages: (1/1)