| Main > Main Forum |
| Need advice on monting a 27" monitor in my cocktail cab! |
| (1/1) |
| rackoon:
Well here is the deal. I have a a 27" dotronix monitor that works awesome but its just sitting on the ground beside my cocktail cab. It came in a big metal case to stack other monitors on it. I would just leave it in the box but it takes up way too much room so I took it apart to install. The only thing holding it in place is a metal ring around the screen with half inch dog ears sticking out on the corners. Can these possible hold up the monitor with the screen facing up? Can I put some padded supports under the tube to support it? :dunno This is the last big step in finishing my cab. Please help! |
| squirrellydw:
I have a billabs 27" and mine is mounted in 1" plywood by 6 bolts going through the ears |
| rackoon:
Is your monitor tube being held in place by just a metal ring? Im afraid that it will fall out of the metal support. :banghead: |
| squirrellydw:
This is mine, it's being held by these ears. http://www.billabs.com/bl27cb0p.htm |
| mccoy178:
Here is what I created for my decased t.v.: http://forum.arcadecontrols.com/index.php?topic=50889.msg526080#msg526080 |
| Navigation |
| Message Index |