Main > Project Announcements
Mike's Arcade Machine Emulator (Knievel inspired) It's Alive!
Anubis_au:
--- Quote from: Green Giant on October 17, 2007, 11:12:37 am ---Has he made a cocktail yet, that is probably the only type of cab knievel hasn't inspired people with.
--- End quote ---
A cab that hangs from the roof. He hasn't done that one yet either. ;D
leapinlew:
on/off switch maybe?
Cabs looking good. Thats a real good cab for a rebuild. Keep up the good work.
gatordad:
The rear access to the cab has a hinged door that needs some fixing as seen here
and here, nothing a little bondo can't fix.
I also pulled off the front kickplate piece as it will be changed to include a sliding drawer, hinges to allow for access from the front of the cab, and some speaker holes.
I also pulled off all of the t-molding
more to come....
gatordad:
Started to frame the corners and edges that needed fixing, I used shims and finishing nails gently hamered into the t-molding groove.
gatordad:
Broke out the bondo and fixed some edges and dings.
I used wood glue and filled the monitor bracket holes with dowels.
After the glued dowels dried I used a chisel to cut them flush and filled any imperfections with bondo.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version