Main > Main Forum
X Arcade Trackball Mounting Plate?
(1/2) > >>
RetroGreg:
Hello,

I've been looking over the forums for about a week now and have decided to make my own panel.

Does anybody know if the X Arcade trackball can be mounted with a standard Happs mounting plate?

I plan on putting a 3" trackball, TT2 spinner, 2 player set up with a dedicated 4 way stick on the panel. I may leave room for a flight stick in the future, but don't know if it will be worth it. Any suggestions? Thanks for your help!!
RetroGreg:
I should add that I searched the forums and only found instances where people mounted the x arcade trackball without a plate by just routing the underside of the panel. I would prefer to use a mounting plate and x arcade does not offer one. Maybe someone knows if they are compatible with the happs plate.

The reason I figured I'd get the x arcade trackball is to save some $ and they give a warranty on their products.

Any help is appreciated.
zaphod:
The X-arcade trackball is the same case as the Betson trackball.  It fits perfectly in the Happ mounting plate.
 
RetroGreg:
Cool. Thanks for the help! Looking forward to starting my panel ;D
DeLuSioNal29:
Have you considered saving even more money and getting this?

http://www.x-arcade.com/mame-panel.shtml

The only thing is that it does not have a spinner built in, but I'm sure you can add one yourself with a plug and play USB interface.
Navigation
Message Index
Next page

Go to full version