| Main > Main Forum |
| Can I add a "spinner" to my cab, and will it fit between two buttons ? |
| (1/4) > >> |
| mrclean:
What I want to know is for one ive seen a few spinners that seem small I'd like to attach one to my current control panel but inbetween two buttons currently there is a row of three buttons I would take out the middle button and replace it with a spinner, can this be done? Also I noticed that alot of them are USB I currently have a trackball set up on the cab, how would I configure the spinner if it does infact fit inbetween those two buttons within mame. Thanks ! |
| Warborg:
--- Quote from: mrclean on October 11, 2007, 03:56:29 pm ---What I want to know is for one ive seen a few spinners that seem small I'd like to attach one to my current control panel but inbetween two buttons currently there is a row of three buttons I would take out the middle button and replace it with a spinner, can this be done? Also I noticed that alot of them are USB I currently have a trackball set up on the cab, how would I configure the spinner if it does infact fit inbetween those two buttons within mame. Thanks ! --- End quote --- http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=86&products_id=268 |
| mrclean:
wow perfect! exactly what I was looking for but in terms of hooking this up / how do i configure this being that i already have a track ball hooked up within mame? |
| TOK:
I have the GroovyGameGear spinner and a Happ USB trackball and they work fine together, but do share the left/right axis. As long as they're not being used at the same time, there is no issue with them working together that way. |
| mrclean:
Any video of the TurboTwist 2™ spinner in action? Below is a picture of sorta how id like to place the turbo twist 2 (*pic is not of a TT2) Thinking about doing something like this, I just hope the spinner wouldn't get in the way of the trackball for games like bowling |
| Navigation |
| Message Index |
| Next page |