Main > Main Forum

Complete List of Spinner Turns Ratios

Pages: (1/2) > >>

Major Rock Hardy:

Does this exist somewhere?

Partial at:
http://forum.arcadecontrols.com/index.php?topic=61381.0

Did DR change the mame code or something else come of this?  If there exists a good list, it would be good to add to the wiki (I'll volunteer to add it but I need the data).

MRH

rockin_rick:

There's some info here -

http://forum.arcadecontrols.com/index.php?topic=23967.0

Also, I checked my Ivan Ironman Offroad wheel.  It has 60 teeth on the steering wheel 'drive' shaft, and it meshes with a 14 tooth gear on the 'driven' shaft.  The driven shaft has 36 teeth on it's encoder wheel.  So that calcs out to 154.286 teeth per revolution.

Rick

EDIT - this info for the ivan wheel is for the version with the cup shaped encoder wheel, not the flat encoder wheel.

Kremmit:


--- Quote from: rockin_rick on October 05, 2007, 07:34:14 pm ---There's some info here -

http://forum.arcadecontrols.com/index.php?topic=23967.0

Also, I checked my Ivan Ironman Offroad wheel.  It has 60 teeth on the steering wheel 'drive' shaft, and it meshes with a 14 tooth gear on the 'driven' shaft.  The driven shaft has 36 teeth on it's encoder wheel.  So that calcs out to 154.286 teeth per revolution.

Rick

--- End quote ---

Is your Ivan wheel the version with the cup-shaped encoder and the larger dark plastic gears, or the one with the flat encoder disc and the tiny white plastic gears?

rockin_rick:

Cup.  Forgot that there were two versions...

Rick


Major Rock Hardy:


--- Quote from: Major Rock Hardy on October 05, 2007, 06:55:52 pm ---(I'll volunteer to add it but I need the data).

--- End quote ---

... as promised:
http://wiki.arcadecontrols.com/wiki/Spinner_Turn_Count

please help me to keep this accurate, if any info is wrong, or you have ideas about a better format for the info, let me know here or better yet, edit the wiki directly

Hope this helps someone...

MRH

p.s. by the way, did anything come of Derrick Renaud's idea of adding auto-sensitivity to MAME?


Pages: (1/2) > >>

Go to full version