| Main > Main Forum |
| Best way to mount 19" LCD TFT? |
| (1/2) > >> |
| kvncooper:
Hey guys, For my first cab project I am going to use LCD TFT 19". I am using the UAII plans for the cabinet (no doubt I will have to make some slight alterations to fit the 19" TFT.) What would be the best way to mount the LCD? Thanks guys. |
| leapinlew:
I assume it has a stand on it? You can remove the stand and use the bolt pattern for the stand to mount it. |
| leapinlew:
Here is a pic of my 17" LCD The 4 bolts you see in the picture is what held the stand on. |
| BobA:
If your monitor does not have a stand mounted with screws they sometimes have a vesa mount on the back with 4 screws mounted in a 3 inch square. Remove these screws and use the screw threads to mount your LCD to to a back board with longer screws. |
| shardian:
I've seen people use pieces of aluminum as straps to hold the lcd in place. I liked that one the best for when you can't bolt directly. |
| Navigation |
| Message Index |
| Next page |