Main > Lightguns

Act-Labs Lightgun mod (99.5% Complete)

<< < (2/2)

waveryder:
Gun is pretty much done had a quick game of HOD3 to test it :)
One thing remains, the LED lighting. I want the lights to only go on when the trigger has been pressed. The LED's are using a 12V supply (pulled from the computers PSU) I want to connect the ground to the trigger switch. Im using the trigger from the original act labs gun. Can I use the ground from the switch for the LEDS? It seems to ground to the VGA box. Any help anyone.........

codeena:
Hi Waveryder,

I've completed one Act Labs conversion in which I placed the Act Labs gun's inners into a Playstation gun. One issue I have is when I pull and release the trigger, it registers as 2 shots about 50% of the time. Does this ever happen to yours?

Also, are you using the optic board of the original gun? I'm using the Act Labs one (just mounted it with a screw and hot glue).

Did you solder wires to the Act Labs trigger board, or are you using the Act Labs wires that come out of the Act Labs trigger board? I'm also wondering which parts of the original you're using and which of the Act Labs.

Thanks for your time!

waveryder:
Mine doesnt register 2 shots? cant think why it would do that?

Im using the original trigger microswitch from the actlabs board however I deided to use the optics from the playstation gun as the actlabs optics were a big load of poo!!! Everything else is the orignal actlabs parts. Except the trigger mechanism as I liked the "pull" that the new springs resistance causes. Hope that helps.  :angel:

Navigation

[0] Message Index

[*] Previous page