| Main > Main Forum |
| Spinner - Should I/Could I? |
| (1/1) |
| DaveMMR:
This is getting nuts. Originally, I wanted simple, swappable panels. As time went on and I made things more complicated, I realized that I didn't want to swap out a panel for that impulse game of Centipede. So I squeeze in a trackball - quite well I might add. Now I've been testing and I feel like I really want a spinner on my panel since I don't want to swap out a panel for Arkanoid/Tempest/etc. (Also, I don't want to keep swapping for guests). My question is: Is this placement good? (See pic) I am looking at getting the TurboTwist2 since it'll be the most space-saving unit (and the good reviews). It fits (where I placed it lands it right above the upper-right of the TB mounting plate). Any suggestions as to a better location? (For reference - the panel is 25" by ~10") BTW - I was able to do a reach test but as my panel is already more or less cut and I'm trying to get the cab done already, I won't be able to do a full on test with everything in place. I already know the TB and spinner aren't the best in a cramped panel (Golden Tee is not this panel's forte), but any off-the-top-of-your-head concerns before I commit to anything would be appreciated. P.S. - The pictures of the parts, save for the spinner, are not perfectly scaled. The spinner is the blue thing that's not a trackball. ;-) |
| TOK:
Since Golden Tee isn't a concern, thats probably exactly where I'd put it. If you're getting the weight with the Turbo Twist, just check the depth below the panel before you drill. I added one to an existing CP also, but since I had more room and do play GT, I put it in the lower right. |
| ARTIFACT:
m;ake sure you can twist the spinner without hitting the p2 joystick in the way... i ended up putting mine above p1 buttons and it works very well this way... not in the way of trackball either good luck |
| Kremmit:
Here are the only places I would consider putting it. I think I like location 4 the best. |
| DaveMMR:
Thanks guys. Relieved to hear that it's quite doable. And Kremmit I like placement 4 as well. Unfortunately, my panel is inside an enclosure (i.e. it doesn't overhang), so I may do what Artifact did and keep the spinner around the left side of the trackball/slight over the buttons. I'll do a quick test with cardboard before I go live with it. |
| Navigation |
| Message Index |