| Main > Main Forum |
| Need to print decals for cabinet |
| (1/4) > >> |
| bluevolume:
I've been trying to figure out how to get some decals for the side of my Sabrecade cabinet. I need a large decal for the sides, and a few smaller ones for the front. I have a good inkjet printer at home, and access to a large-format one at work. What media would work well for this? Can you buy large photo paper with adhesive on the back? Is that even a good idea? I looked into having this done in vinyl, but the shop said that it would be like 5 layers and it would be expensive. Kinkos is a no-go, they will not print the logos (at least the lady I talked to at the counter woudln't do it). Also, I would like to print a sheet to put beneath the plexi on my control panel. What is a good method for that? Thanks! |
| SlammedNiss:
--- Quote from: bluevolume on September 19, 2007, 01:47:01 pm --- I have a good inkjet printer at home, and access to a large-format one at work. What media would work well for this? --- End quote --- What material are they using for the one at work? Is it just printing on paper? |
| bluevolume:
As far as I know it is a roll of plain paper. I could buy whatever media is needed. |
| mcfreak:
I've had my eye on this for a while: http://www.atlex.com/paper/adhesive_vinyl.htm We have a large plotter/ink jet at work as well. I haven't made the decision to do it yet but I have 4 cabinets to do so I would think it would come out cheaper. |
| markrvp:
Here is what I use. http://www.lexjet.com/lexjet/product_disp.asp?dept%5Fid=12077&pf%5Fid=AQPSRM |
| Navigation |
| Message Index |
| Next page |