Main > Main Forum
Push button connector size
Pages: (1/1)
Hawk Daddy:
What size connector do i need for happ push buttons I'm talking about the little terminal connectors.
They look like this
Also where can I order some in bulk like around 200-500?
Hawk
DrFrag:
4.8mm connectors will fit, if you're using metric gear.
I think they're called Tab Connectors or Quick Release Connectors, if that helps your searches.
kowal:
6,4mm universal - fit terminal 4,8/6,4
Happ use 4,8 mm
ultimarc use 6,4 mm
sanwa/seimitsu 2,8mm
crown/korea 4,8mm
brock.sampson:
The tab on the microswitches is .187. The color of the crimp connector is dependant on the gauge of wire you are using
16-22 Red
14-16 Blue
10-12 Yellow
I was able to find .187 disconnects at my local hardware store. Divemaster sells these http://forum.arcadecontrols.com/index.php?topic=47066.0 100 for $5.99. Bob Roberts also sells them http://www.therealbobroberts.net/conectas.html 50 for $5.00.
SirPeale:
--- Quote from: brock.sampson on September 17, 2007, 09:44:49 am ---The tab on the microswitches is .187.
--- End quote ---
It depends on the switch. It can be .250 as well.
Pages: (1/1)