| Main > Main Forum |
| Push button connector size |
| (1/1) |
| Hawk Daddy:
What size connector do i need for happ push buttons I'm talking about the little terminal connectors. They look like this Also where can I order some in bulk like around 200-500? Hawk |
| DrFrag:
4.8mm connectors will fit, if you're using metric gear. I think they're called Tab Connectors or Quick Release Connectors, if that helps your searches. |
| kowal:
6,4mm universal - fit terminal 4,8/6,4 Happ use 4,8 mm ultimarc use 6,4 mm sanwa/seimitsu 2,8mm crown/korea 4,8mm |
| brock.sampson:
The tab on the microswitches is .187. The color of the crimp connector is dependant on the gauge of wire you are using 16-22 Red 14-16 Blue 10-12 Yellow I was able to find .187 disconnects at my local hardware store. Divemaster sells these http://forum.arcadecontrols.com/index.php?topic=47066.0 100 for $5.99. Bob Roberts also sells them http://www.therealbobroberts.net/conectas.html 50 for $5.00. |
| SirPeale:
--- Quote from: brock.sampson on September 17, 2007, 09:44:49 am ---The tab on the microswitches is .187. --- End quote --- It depends on the switch. It can be .250 as well. |
| Navigation |
| Message Index |