Main > Everything Else

Awning Motor

<< < (7/11) > >>

mpm32:
The red thing in the middle is actually two things with a sticker on top making it look like one. Not sure what those are.   The thing on left by my fingers (PIC?) is what resides underneath the round magnet when it is all together.  You can see the gears by the green ground wires in the lower left.  The gears turn the magnet for what I assume is the limit adjustment.

Ken Layton:
Actually the red things look like 'snubber' capacitors to reduce arcing and current inrush to the relays.

I'd go ahead and replace the two relays anyway. That's a good price on them at Mouser.

mpm32:
Thanks Ken.  I ordered them, I'll post the results once I get them replaced.

Ed_McCarron:

--- Quote from: Ken Layton on September 13, 2007, 12:45:01 pm ---Actually the red things look like 'snubber' capacitors to reduce arcing and current inrush to the relays.

--- End quote ---

Oh, thats two things... Yep.  Long rectangular caps.  I thought it was one box...

By PIC, I meant the multipin chip on the other side... Its a microcontroller.

mpm32:
Ah, then what's the chip looking thing in between my fingers with the three legs?  Just curious.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version