Main > Buy/Sell/Trade - non-retail
FS/FT used Switches, Buttons & other junk.
(1/7) > >>
_) (V) (-):
These are all USED parts and should be regarded as such unless specified otherwise.

Shipping charges will depend on weight of total order and packaging.

I've done my best to point out any known damage or major blemishes.

I will advise on any found major damage/staining/fading BEFORE shipping or accepting payment. I can e-mail pictures of the exact parts upon request.

I am still in the process of sorting, counting, photographing, etc... so bear with me on this. I will try to update this post and add in color/quantity/prices as soon as I can.


Leaf Switches & Buttons 



Photo shows all colors/sizes of wico buttons available.
Quantities are limited. Buttons include nuts.
Mostly White, Red & Cheese colors available at this time.

Black: 14 Short - 4 Long  * PENDING *
Red: 54 Short - 11 Long - 20 Trans - 20 Hooded
OrangeshYellow (Nacho Cheese): 28 short - 8 long
Green: 4 short   * PENDING *
Orange: 3 short - 3 trans    * PENDING *
Yellow: 3 short
Blue: 17 short - 2 trans short - 3 trans long
Dk Blue: 4 short
Gray: 1 short
White:  too many !

Transparent/translucent (whatever) : All except a 20 reds are  * SOLD *

I'll fill in more color quantities very soon
I've run some of the nastiest ones through the dishwasher and they came out pretty good.
$1 each for the cleaner ones, 50% off for the funky scratched up looking ones.
Holders & switchs available below...




Spacers w/ contacts:  74 Thick & Med - 12 Thin   $1 each
Spacers only: 25 various thicknesses  2/$1
Contacts only: 23 a few odd styles, most are common style, few oddballs  
Black collar spacers: 6 Thick (not shown) - 40+ thin (as pictured)
the 6 Thick collars are   * PENDING *
I will refine these numbers once I get a chance.

The clear rings on the right side have been divided into two sets.
I have many (20+ each piece) for the various ones in the top picture.
What is pictured for the lower set is all that I have available.


Buttons and Switches



I have both New & Used 1 & 2 Player Start buttons, they come with microswitches & nuts.
Used:  6 available $1.50 each (These are very clean, like new, almost)
New:  4 available $3 each  (these are factory sealed for my protection)

Plugs: 6 available  (These are black and made of a hard plasticized rubber material)
White round buttons: 3 (These have a transparent center with some kind of insert)
Red contained switches: 2 (note the damage shown in photo, other switch is ok)



Reject buttons: only ratty looking ones left. Have many new inserts.
Knobs:    * SOLD *
Audio Transformers: 3 as pictured. Multitap. Not yet tested, look clean.


Luminated buttons



I have only just begun to sort through all of these.
This picture shows all the color/shape variations I have. Mostly Red and White ones.
Many of the white ones have a charming nicotine caramelized tinting as displayed in middle of picture.  (The one ironicly labeled 'Discard')
There is a very limited amount of bulb holders & inserts compared to the number of buttons. Many have some scuffing on the surface.


And my latest project:
Luminated coin/credit buttons:


Bottom set was made from used buttons, top set is new stuff from Happs.
More info (and prices) to follow.


Pedal Balls



Taito Gas pedal with switch, very used $? make offer
3" Happs trackball, brownish marble, It tested ok, fairly clean inside.
another used Trackball coming soon.
3" Trackball mounting plates - SOLD

Happs buttons


Solid color long barrel type New & Used
Red: 10
White: 5
Blue: 5 
Yellow: 6 used 10 new


Nuts Breakers etc...



Happs Joystick 'bat style' handles New Green 3 available USED Black 2   * PENDING *
Square D 20 Amp breakers (don't ask me why these were in there)
Switch brackets, roller & lever switches

The nuts are automaticly included with buttons, but so many people are asking . . .
Here are my nuts

Other stuff I'll post soon:

DVI VGA cables, splitters
IDE Hard drives, 4, 6, 10, 20, & 40 gig sizes - make offer

Intel PIII 800 & 900 MHz, 128 or 256 RAM mainboards.
Intel PIV 1.8 & 2.0 MHz, I forget how much ram
They got all the typical onboard stuff plus USB, Some have onboard video too.
One is a D815EEA & I'd have to look up the rest.

I also have the 235W power supplies and ide drives loaded into cases for them. Figured the boards are all that is really worth shipping. But if you need the stuff, I have it too.

IDE CD-RW drives

Items I am looking for:

Marquee from a 1991 'SCI' cab
Front glass & game board for same.

Lock cylinders with keys

15" Subwoofers

Feel free to make me some reasonable offers.

Thanks for looking and check back, as I'll never be done counting up and sorting out this crap stuff.












heffe2001:
Those knobs (with the one with an endcap), look like the old rotary stick knobs off my old Heavy Barrel I used to have...
shardian:
How many barrel locks are you needing?
Thenasty:
I could use 1 GREEN and 1 ORANGE (not shorties) buttons. I just need to amtch the colors on my CP. Maybe just to be safe that the GREEN (looks like yours is lighter than mine), I'll just take 2 GREEN and 2 ORANGE.
_) (V) (-):
Thanks Heffe2001, now if I could find someone who needs a few....

Shardian - I have a need for 6 lock sets right now. Would take twice that many if they were all keyed alike. If I could get a set of at least 3 keyed the same it would be a big help. Used parts are fine as long as they work.

Thenasty - There is some minor variations in some of the colors. I could send you the a Matched set of the darker ones from each for $4 plus shipping.  Did you want holders & contacts too? If so how many and what thickness? Let me know and I'll make you a nice mini package deal.

I've added some more info to the top post, will add some more item/pictures soon.
Thanks!
Navigation
Message Index
Next page

Go to full version