| Main > Main Forum |
| best way to clean a jamma board |
| (1/2) > >> |
| SUPER_SSII_TURBO:
I have some jamma boards that could use a little tlc, what is the best way to clean them and de-gunk the boards. what should I use,? thanks so much |
| Crowquill:
Are we talking just normal dust and dirt or sticky hard-to remove "gunk" If it's just dust canned air can do wonders. I've not had any that needed more than this. Suprisingly, one of the most favored methods for normal dust and dirt cleaning is to wash them in a dishwasher. Just make sure they dry completely before powering it back up. |
| arcadefever:
If you choose the dishwasher solution, make sure to remove the chips before (roms) ;) |
| t8erbug:
Ive found that VCR head cleaner works well. They make critical parts cleaner in an aerosol can. |
| RayB:
Dishwasher. Without much soap. PS: I have NEVER heard of needing to remove the chips. Just DO NOT let the board sit there and dry on its own time. Immediately take it out and dry it out. |
| Navigation |
| Message Index |
| Next page |