| Main > Main Forum |
| 3" Trackball: Regular or Highball? |
| (1/4) > >> |
| javeryh:
It's decision time... Anyone have any preferences? I will be installing this using the mounting plate which will be covered by 1/8" thick plexiglass AND 1/8" thick wood veneer (instead of art which has a negligible thickness). I'd just get the standard one but I'm afraid the extra 1/8" veneer will make the trackball seem a little low... Thoughts? :cheers: |
| ahofle:
I prefer the highball even without the extra 1/8" you are talking about adding over the plate. I find I have much more control with more of my hand in contact with the ball. |
| javeryh:
I'll be playing mainly Golden Tee and Bowling though... will it hold up? |
| scotthh:
u_rebelscum says the highlip trackball's lip is 3/16" Lip and ball height. More pictures. The thread on this topic. You have 1/8"+1/8"=2/8" =4/16" of material on the top of your CP. Let's assume you use the highlip trackball (3/16" lip) and router a space for the trackball mounting plate to sit flush with the CP. The lip would extend 3/16" less the 1/16" mounting plate, or 1/8" above the CP. The top of your lip would be 2/16" below the top of your plexi and the ball would be pretty close to GT ball height. I think this is the way to go vs. a highball which would give you 0.4" extra ball above the lip vs. the highlip. Plus the highball has only 1/8" of lip, so the lip would be even further below the plexi. some guys have chamfered their plexi so they don't injure themselves during particularly aggressive GT swings. Edited for math error. Re-edited to account for mounting plate. |
| Green Giant:
--- Quote from: scotthh on August 29, 2007, 04:09:27 pm ---u_rebelscum says the highlip trackball's lip is 3/16" Lip and ball height. More pictures. The thread on this topic. You have 1/4" of material above the top of your CP. If you use the highlip trackball and router a space for the trackball mounting plate to sit flush with the CP, you'd still have 1/16" of lip protruding from the top of your plexi and pretty much same-as-GT ball height. I think this is the way to go vs. a highball which would give you 0.4" extra ball above the lip vs. the highlip. Plus the highball has only 1/8" of lip, so the lip would be below the plexi. some guys have chamfered their plexi so they don't injure themselves during particularly aggressive GT swings. --- End quote --- I second the high-lip trackball. It is nice cause it comes with a spacer if you don't have plexi, which I currently don't, but if I choose to add some, it will still feel nice by removing the spacer. |
| Navigation |
| Message Index |
| Next page |