| Main > Main Forum |
| Concave Buttons, Slightly sticking what company makes the donkey kong/mario ones |
| << < (2/2) |
| xmenxmen:
I would not even consider x-arcade button commercial grade. The x-arcade ones have a click sound to it which to me feels a bit weird. Most people here tends to use Happ buttons, especially the Happ compettion concave buttons. |
| mrserv0n:
One suggestion if it is a new button and not filthy as suggested above is I had a pushbutton that was sticking and it was brand new, the actual switch on it was fine also, the button I had drilled for it was a little to tight and when the button was fully pushed into the CP it would stick, I solved this by simply expanding the radius of the hole. If you drilled the hole yourself you may want to ensure its not TOO tight of a fit in there. |
| mrclean:
this was a pre-drilled dream arcades cp, initially when I got it no problems, but a year and a half later I'm looking to replace the buttons and the sticks |
| leapinlew:
--- Quote from: mrclean on August 29, 2007, 12:39:56 pm ---the only problem is what other company makes a top panel switchable 4-8 way stick? --- End quote --- I wouldn't call their stick a solution though. In my opinion, it doesn't work well for a 4 way and fails miserably at an 8 way. The throw is just too short. Got with a U360 instead. It'll handle your 4 way, 8 way and Q bert style games, it's not switchable from the top of the panel though. Instead, it switches digitally instead. ;D |
| Navigation |
| Message Index |
| Previous page |