Main > Main Forum
Really Dumb question about mounting joysticks (mag-stick plus)
<< < (2/3) > >>
GameOver:

--- Quote from: gurnie on August 20, 2007, 10:02:44 pm ---So, do you choose to screw in the mount then put in the stick...
--- End quote ---

Bingo!  The hole in my CP at least isn't big enough to allow the 'bat' stick to pass thru so only option for me was to put the mount in first, then slide the stick in.  Good luck!
gurnie:
If possible I will be removing the bottom of the control panel so I shouldn't have any issues getting the joystick into the mount (fingers crossed).
BobA:
The magstik plus will not mount on the same screw holes as a super(used in the hotrod)  You will need an adapter plate to use the existing screw holes or you will need new screw holes or a different mounting method.  One set of holes is 20 mm off.

BobA:
Link to retroblast article on making mtg plates.

http://www.retroblast.com/articles/joystick_plates-04222006-01.html
gurnie:
My dad and I were able to mod the control panel so it fits (without drilling holes).
Navigation
Message Index
Next page
Previous page

Go to full version