Main > Main Forum
Really Dumb question about mounting joysticks (mag-stick plus)
gurnie:
Be kind to the wee girl:
I have a hotrod se that I am putting in my solar fox cab (that was for free, completely gutted). I want to change out the 1st player joystick with the Mag-stick Plus ( http://www.ultimarc.com/controls.html ) so players have the option of 4-way or 8-way.
So I'm studying the stick and figured out I can't remove the handle top in order to slide out the plastic disc that cover the mounting hole. Unscrewing the mounting plate doesn't help either. :dunno
Do i need to unscrew the nut at the bottom of the stick in order to properly mount the stick?
If so, has anyone does this on a mag-stick plus? I'm sure this joystick is probably a little more cranky with how the spring and bolts are re-attached.
I was going to ask Andy of Ultimarc but I've already bothered him with a bunch of i-pac chip replacement questions and I didn't want to bug him more.
and I tried searching for the answer but I couldn't find what I needed.
thanks for your time and patience guys. :notworthy:
Oh, and if anyone has it, does anyone have the layout (in dimensions) of the controls in the hotrod se? I made a cool marquee and I want to make a better control panel overlay to cover-up that butt-ugly purple. Sorry that wasn't very lady like to say ;)
GameOver:
yep, unscrew the nut at the bottom and the stick will slide out. Just be careful not to lose the little parts and the spring! Pay attention to the order you take them off so you can put it back together. Only a couple of parts not hard at all. Good luck!
Zebidee:
Be careful not to bend the small U-shaped metal bracket that comes off after you loosen the nyloc nut at the bottom of the shaft. If this U-bracket gets bent even a little, it can make the joystick action a bit sloppy and unreliable. Good news is that if this problem occurs, you can carefully bend it back into shape with pliers and patience.
gurnie:
Awsome, thank-you both. :)
So, do you choose to screw in the mount then put in the stick (after removing the stick) or does it not really matter?
tba:
you might also want to make sure that you have enough room in the hotrod se to mount the stick, there is VERY little clearance on the bottom of the hotrod, if the magstick is even a little bigger it wont fit !