Main > Project Announcements
Kaytrim's Kustoms Back in Action
theCoder:
Are you planning on keeping the edges sharp? I really like large (1/2" or more) rounded over edges. They just beg to be touched.
So you're going pro huh?
Kaytrim:
--- Quote from: theCoder on August 11, 2007, 10:51:27 pm ---Are you planning on keeping the edges sharp? I really like large (1/2" or more) rounded over edges. They just beg to be touched.
So you're going pro huh?
--- End quote ---
That is the plan. ;D Nothing is glued up yet just using dowels to join the panels. Once the final setup is done I will glue it up and add a 1/2" round over. I can't afford the 3/4" round over just yet. I need to get a drill press first. My first few orders will go towards the purchase of the drill press then any other tools I need.
Below is a sample with the controls installed. These are just ones I had laying around. I'll have to top mount the Happ joystick due to the short profile of the box. I might use the blue and white buttons with the E. Honda overlay. What do you think?
TTFN :cheers:
Gatsu:
Awesome.
So the new template worked out then. I am glad for sure.
Can't wait to see it finished.
Kaytrim:
Update time. :applaud:
The top is cut for a top mount Happ Competition joystick and buttons. The box is now glued together and the edge treatment has been done. Now to fill the minor cracks and sand in prep for paint.
TTFN :cheers:
edit: my design has moved away from this prototype. All four sides are now angled but closer to 90 degrees. See later pictures.
Kaytrim:
I had almost forgotten the admin buttons. I had planned on mounting them on the front face but after setting up the top controls I didn't know if there would be enough space for the ones on the front face. Luckly for me they did fit and with just enough room to spare. Even with the counter sinking of the front face buttons.
TTFN
edit: The CP area has been enlarged to give more space.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version