| Main > Main Forum |
| button problems (ghosting) |
| (1/4) > >> |
| infamous360:
one of my buttons is ghost... the operators how do i fix it? do i need a new microswitch? |
| infamous360:
i just checked the connections.. there are no lose wires =/ |
| slider2732:
I've never encountered ghosting, but believe it related to a USB set up. Apparently USB only allows so many key presses at the same time, else, problems start. I've done about 40 PS/2 keyboard hacks and never had troubles like that, hence the USB thought. If yer using USB, then could that be the answer ? I'm sure others have better ideas on it all though. |
| xmenxmen:
What encoder are you using? You can always try connecting the 'ghosting' button and the other way to a known good switch to see if the problem goes away. This should help emit a bit connect or wire. |
| infamous360:
i am using an ipac 2 USB value edition I only have 9 buttons hooked up to it and a coin door.. which i hardly use any of them unless i am selecting a song (my cab is a dance dance revolution) I also have the dance pads hooked up through USB connectors (trio linker pluses) (if it matters) |
| Navigation |
| Message Index |
| Next page |