| Main > Main Forum |
| U360 and Ipac2 wired up |
| << < (3/3) |
| u_rebelscum:
--- Quote from: Havok on August 07, 2007, 07:32:02 am ---Yes - you need the harness, and that will give you 8 buttons per U360... --- End quote --- But only if you want the buttons to be through the joystick. If you already have an Ipac and will wire the buttons through it, you don't need the harness. |
| hellothere123:
i have the street fighter setup, so each joystick config uses up 6 buttons, total of 4 buttons left for admin purposes...one of 4 = shift, then we got 3 left. 1) Plyer1 (Shift 2) start 2) Coin1 (shift 2) 3) pause (shift reset) Then you could use the other 12 buttons (in the street fighter config) for shift admin keys... is that correct? I'm assuming that for mouse left and right click, you'd use a xarcade trackball setup (removed from the hard case it comes in and mounted on your control panel) Otherwise you'd need extra keys for mouse left and right...any ideas other than that? |
| ARTIFACT:
--- Quote from: u_rebelscum on August 07, 2007, 12:12:04 pm --- --- Quote from: Havok on August 07, 2007, 07:32:02 am ---Yes - you need the harness, and that will give you 8 buttons per U360... --- End quote --- But only if you want the buttons to be through the joystick. If you already have an Ipac and will wire the buttons through it, you don't need the harness. --- End quote --- Thanks for clarifying. |
| Navigation |
| Message Index |
| Previous page |