| Main > Main Forum |
| guys i got a quick wiring question about donkey kong |
| (1/1) |
| GMZombie:
ok im trying to rewire up this 4 board donkey kong board so i can put it in a cab since i havent been able to find a dk wiring harness from the cocktail around. Now the board asks for +24v. im using one of those jammaboards.com jamma adapter and i dont recall any 24v being on jamma? where do i get this voltage from |
| BobA:
The 24 V was supplied to the CPU board from the DK Power Regulator board. You would need a separate power source to supply this to your board as it is not a standard voltage. |
| GMZombie:
now is that just for the coin counter or can i not run this board without the 24v |
| BobA:
Sorry I don't know where it goes on the CPU board as I do not have a schematic of the board. Maybe someone else with DK can help. |
| Navigation |
| Message Index |