Main > Main Forum
Got my die hard cabinet... doesnt fit in the door .. sigh
<< < (2/4) > >>
t8erbug:
How much to narrow is the doorway? Could you take out the door frame and get it in? If you pull the trim around the door and run a saws-all around the frame. It should release the frame in one piece and then you could just nail it back in. Had to do it once for a cabinet.
Austin.Wolff:
How sad :(
mrserv0n:
T8erbug, Yea it would JUST squeeze in if I removed the door frame, but its not my house I just rent a room so im not allowed to remove his door frame.

I could take the walkout basement window out when noones home and get a buddy to throw in there but then it would be trapped in the weight room with the same problem haha.

I have to believe the cabinet can be disassembled. Its a really strange plastic cabinet. I just need a extremely powerful drill to get out the rotten screws.

It sits on a 34" metal pad that looks like it was built to the bottom of the cab to never come off, could be wrong but there are 4 large iron rods coming out the bottom welded in there.. tommrow in the daylight ill have a better look at how its put together... hope she doesnt get too lonely out there :(
t8erbug:
On the screws, if they wont back out you can usually use a drill bit half the diameter of the head to drill just deep enough for the heads to pop off. After you take the panel off you can use a pair of pliers to remove the rest of the screw.
mrserv0n:
I was able to pretty easily disassemble the cab in just 2 pieces with 8 screws and fit it into my door! Time to clean in up and I will post some pics!!  ;D
Navigation
Message Index
Next page
Previous page

Go to full version