| Main > Main Forum |
| Coin Door Help - AKA - I'm dumb |
| (1/2) > >> |
| iamnaeth:
I'm having a little trouble figuring out how this coin door mechanism A) fits in the coin door and B) can send a trigger saying a coin passed through. I order a Happs over/under coin door from ebay and since I didn't read the listing thoroughly enough, it came without coin mechs. I ordered some mechs from someone on this forum and I seem to be too dumb to figure it out....either that or I have the wrong mech. So without further ado (adieu?): Picture 1: The coin door without any mech in it....you may notice the return bin is missing from one of the sides....that's be cause I took it it out in effort to fit the mech in. Picture 2: A blurry picture (sorry) of my mech. Picture 3: The coin door with the mech in place on the side without the return bin. Like I said before, it was the only way I could get it to fit. Picture 4: This is a side view trying to show that the return bin is in the way. What you're seeing is the return bin on the other side of the mech in place. Picture 5: Just another picture. So....what am I doing wrong? Do I need to order new mechs? If so, what should I order to be able to handle all change (I wanna use it like a piggy box) and tokens (ordered some BYOAC tokens). Thanks! Nathan |
| RayB:
See in your last picture, on the right, the "arc" shaped cut out hole? There should be a wire and microswitch mounted on the other side of that. Coin falls out of the mech and hits the switch wire on its way down to th ecoin box. |
| iamnaeth:
Ahh, that makes sense about the microswitch. Any clues why it won't fit? Is that the wrong type of mech? |
| asmida:
I can't tell for certain, but It almost looks like those mechs will fit. The plastic should go under the spots for the connecting screws. Line up the arrows in my drawing. |
| asmida:
http://forum.arcadecontrols.com/index.php?board=2;action=display;threadid=19200 As far as All-in one mechs- check out the above thread. |
| Navigation |
| Message Index |
| Next page |