Main > Main Forum
Help! Missing key for the back panel of my P.O.W game
<< < (4/6) > >>
SithMaster:
? But Chad if the guy has a pet or a child it could find its way into the cab from the back if the door isnt in place and locked.
severdhed:
my cabinet has plastic handles that are used to tilt the cabinet back and roll it.  they are directly above the removable back panel and are held in place by a few screws...if you have something like this, you could probably remove them and get your arm inside enough to remove the screw and disengage the latch
ChadTower:

--- Quote from: SithMaster on July 23, 2007, 12:55:28 pm ---? But Chad if the guy has a pet or a child it could find its way into the cab from the back if the door isnt in place and locked.

--- End quote ---

That's true, but given that they're up against the wall most of the time, that is very unlikely.  I'm not saying leave the back open, I'm saying you don't need the barrel lock.  Some velcro or any other method works just as well, as does a $3 replacement lock.
SirPeale:
Two sheetrock screws driven into the upper corners works wonders.
Malenko:

--- Quote from: Peale on July 23, 2007, 01:24:57 pm ---Two sheetrock screws driven into the upper corners works wonders.

--- End quote ---

thats what I was using until I got replacement locks from you Peale :)  Just drill it out then replace them, I got new locks for my MAME and MKII machine from Peale so that all the keys matched I got a few more cabs lined up so I'll be hitting him back for more.


Also to note, my Pengo cab had a lock on the back and before I tried to drill it out, I used a cat's paw to put a little distance between the 2 pieces of wood and the back popped right off.
Navigation
Message Index
Next page
Previous page

Go to full version