| Main > Project Announcements |
| ** ARTIFACT Game Museum ** GIFT: Sketchup plans and... ARTWORK! |
| << < (12/58) > >> |
| ARTIFACT:
hahaha :-) yes i love doing this stuff... i designed the cab so the TV (and computer + back panel) can be removed before moving it - makes it quite light because of t |
| ARTIFACT:
Next model I made: Happ Pushbutton (+ my cherry microswitch) This will be great to have when planning my CP in details... I can see EXACTLY where the buttons will sit inside the box... where the connectors stick out, etc. 6 buttons configuration ... rotated to allow cherries to have space: |
| mcfreak:
Man, those models would be great examples for the wiki... What the hell is a "Cherry Microswitch"?? Well, here is a model. ;) :notworthy: |
| theCoder:
For the casters on the back side, I'd recommend cutting off the metal on the bottom side. You can then mount the wheel closer to the ground. This will get the weight on the wheels earlier, and allow you to position it so ALL of the weight is on the wheels instead of your forearms when you move it. In the picture below, the casters are not yet mounted, but you see the metal removed on one side. |
| ARTIFACT:
--- Quote from: mcfreak on July 31, 2007, 08:46:18 am ---Man, those models would be great examples for the wiki... What the hell is a "Cherry Microswitch"?? Well, here is a model. ;) :notworthy: --- End quote --- Good idea :) theCoder: Interesting! How do you mount the casters behind if the metal plate is cut, where the screw holes are located? I see that 2 of the 4 screw holes are still present, but I wounldn't trust the original weight rating of the casters with only half the screws present. Are you going to drill 2 additional holes by removing the wheel to give you acess under it? Thanks! |
| Navigation |
| Message Index |
| Next page |
| Previous page |