Main > Main Forum

Worried about button lengths vs. joystick lengths.

Pages: << < (2/2)

ids:

Cant speak specifically to the buttons you bought, but the ones I got (and I suspect they are all much the same) use an underside nut to tighten things up, letting you adjust from the buttons full length to almost nothing.  For the IL translucents I got, that would be quite a range (prolly more than 1" to ...nothing).  As a previous post mentions, the only issue is clearance under the panel.  At the top, all is well.  I'm just starting too, hope this helps.

NightGod:

The threads for the button nut run up the full length of the pushbutton. You can use the same buttons in a 2 inch thick CP (why you'd build one that thick, I have no idea, but you could) as you would use in a 1/8' metal CP.

Pages: << < (2/2)

Go to full version