Main > Main Forum
Help With LED-Wiz Wiring Please!
<< < (2/3) > >>
lettuce:
Ah ok that make sence now. Is it ok to daisy chain the 5v wire from led to led, as to limit the amount of wires going from the LED-Wiz? I'll have 26 buttons connected up altogether, would i be able to get away with this by using just the USB power??
Kaytrim:
Dasy chaining the 5v would be fine.  You are pushing over the limit on the LEDs though.  To be safe I would use an external source for your 5v.
lettuce:
Is there anywya to wire these types on buttons to the LED-Wiz?, http://www.happcontrols.com/pushbuttons/5700043x.htm
Kaytrim:
You need 14v of power for those.  The LED-Wiz is only 5v.  If you want only on/off operation then you might be able to use a relay that trips at 5v to allow the 14v through.  You would need to use 12v from the PC power supply or get 14v from someplace else.

TTFN
lettuce:
Thats a real shame, as i have these types of push button as my Player start buttons, and wanted to set them up with LED-Wiz so when you inserted the right amount of credits they would start to flash  :cry:
Navigation
Message Index
Next page
Previous page

Go to full version