Main > Main Forum
Help With LED-Wiz Wiring Please!
RandyT:
5v operation is what is "supported" because it is very safe. The drivers on the board can theoretically handle much higher voltages.
Send me an email for more info.
RandyT
Kaytrim:
--- Quote from: lettuce on July 13, 2007, 11:41:01 am ---Thats a real shame, as i have these types of push button as my Player start buttons, and wanted to set them up with LED-Wiz so when you inserted the right amount of credits they would start to flash :cry:
--- End quote ---
That could still be handled with a relay, you are just turning it off and on. The LED-Wiz would control the relay and the relay would pass the higher voltage through to the button.
RandyT:
--- Quote from: Kaytrim on July 13, 2007, 11:58:20 am ---That could still be handled with a relay, you are just turning it off and on. The LED-Wiz would control the relay and the relay would pass the higher voltage through to the button.
--- End quote ---
This would work, but probably isn't necessary. I have a 12v lamp hooked to a test unit here, right next to a 5v LED connected to the same LED-Wiz board, and both are pulsing and working just fine. But there are a few cautions that need to be heeded when using it this way.
RandyT
lettuce:
I sent you an email RandyT