| Main > Buy/Sell/Trade - non-retail |
| WTB: Millipede board and Centipede CP |
| (1/1) |
| cscon115:
Folks, ** I am looking for a millipede board so I can convert my centipede to a multipede. ** I am also looking for the metal control panel for a centipede box PLEASE, don't be embarrassed if you think your CP is not good enough or if it is pretty beat up. I am a restorer - so I would only alter something that is kinda beyond repair, like an already altered CP. I would only do this to a beat up control panel, I want to modify the CP as follows: 1) Open up the trackball hole so it will take a 4" ball (not the standard 2.5") 2) Weld the bolts that hold the trackball in place so the top is flush (that way there would be no bolt heads showing) Dan |
| cscon115:
Ok, I was misled by a friend who told me Millipede boards and Centipede boards are interchangeable - they are not. So I am not looking for a Millipede board (for now). I plan to figure out how many signals need to be swapped in order to make the millipede work. Next I think I will try to layout a board that will be inserted between a millipede and the centipede connectors so I don't have to hack the harness. (I JUST CAN'T DO THAT!) If I layout a transition board or hack a jamma board I will post my results for all to see! Thanks for all the PM's about the boards! Dan |
| Witchboard:
The most simple, but maybe not affordable method would be getting a Millipede board and purchase a Multipede kit and connecting it in your Centipede cabinet with a Millipede to Centipede cabinet adapter. If you buy them both at the same time they cut $5 off the price. |
| Navigation |
| Message Index |