| Main > Main Forum |
| Need help troubleshooting 3" Happ Trackball |
| << < (6/8) > >> |
| nickbuol:
ARGH!!! In my testing, I managed to accidentally pull the red input wire out of its socket in the plug that attaches the USB/PS2 cable to the first board... I don't think that it was loose. I had the board lightly attached to a rubberized "vice" like grip on my work bench, and didn't see that it was snagged when I grabbed it quickly and left the workbench. I felt a good little pull, and then saw the loose wire. Still not EXACTLY sure what it snagged on, but ARGH I am getting frustrated. Now to figure out if I can fix that easily... |
| rescue161:
That is difinitely not cool. Hope you can get it fixed (at least that part) so you can figure out what's really wrong with it. |
| nickbuol:
I got it back together. Any thoughts on what else to try, or should I just get an order placed for replacement boards? Thanks! |
| rescue161:
To do any further troubleshooting I'd need to actually see the board. You're going to better off buying the new boards from divemaster127. That's a good deal. To troubleshoot further, you'd need an oscilloscope to "see" if the timing on pins 6 through 9 is right. |
| nickbuol:
Hey, thanks for your help up to this point. I just fired off a PM to divemaster127 about the boards... |
| Navigation |
| Message Index |
| Next page |
| Previous page |