Main > Main Forum

Happ 3" trackball Molex plug

Pages: (1/4) > >>

Breaker:

Hello all,

I'm looking for a Molex plug for a Happ 3" trackball wiring harness (see attached image); or more accurately a mating plug for the one pictured. I've checked my local parts store and came up empty and I've also looked online at Digikey and Mouser but it's difficult to narrow down the proper part without an image to compare with.

Can anyone point me to a supplier (or part number) for this plug?


Thanks for any assistance!
Breaker.

Disturbed013:

Just built the exact same thing myself so I wouldn't have to cut my t/b or controller harness'

I don't have the part number, but I can run it down for you hopefully.  I sort of 'borrowed' my supplies from my work, for testing purposes  ;)

I believe most of our parts come from a company called kimball-midwest, if that helps any, but I'll check with my tech tomorrow.

On mine, I actually had to find the six-pin molex and then find the female pins themselves separately as the standard ones didn't quite fit right.

If there is anything like an Auto Safety House in your area (light bars, beacons, sirens, stuff for police/fire/city cars etc.)  they should have something or be able to point you to it locally.

D13

hng:

I was at micro center yesterday, and they have a nice big bin with all kinds of computer connectors, including the 6 pin molex. Plus they had pins for all of the different size connectors. I couldn't find it on their website, but here's the store locater... maybe you have one by you.

http://microcenter.com/at_the_stores/index.html

BobA:

to mate with the trackball you need a 1261-R and six 1189 socket terminals.

http://www.molex.com/pdm_docs/ps/bemle7w1_ps.pdf

Put 1261-r into the search at molex.com and you will find pics and all other data.




ElfShotTheFood:

radio shack has them,  i bought mine about a month ago.

Pages: (1/4) > >>

Go to full version