| Main > Buy/Sell/Trade - non-retail |
| WTB: Carriage Bolts for CPs |
| << < (2/2) |
| Luigi:
--- Quote from: Havok on June 18, 2007, 10:07:48 am ---You are correct - the 3" and 2" is the length. These are the standard diameter bolts for mounting joysticks and such. About the 10-24: The first number is the diameter, and the second is the threads per inch. There is a formula for determining what the actual diameter is, but a 10 is about 3/16 of an inch. Make sure if you order from DM that you specify you want the nut as well - I ordered a bunch a ways back and only got the bolt... --- End quote --- Thanks. You are right....I need the nuts, too. Hehe, that would be "funny": I'd have the bolts but not the nuts :D So 3/16" is ~4,7mm...hmmm...that's quite a lot. The ones I have are smaller....I will measure them.... |
| Navigation |
| Message Index |
| Previous page |