| Main > Buy/Sell/Trade - non-retail |
| WTB: Carriage Bolts for CPs |
| (1/2) > >> |
| Luigi:
Hi guys :) I'm searching for some carriage bolts in small size for fixing controlpanels. I mean these: Here in Germany I can only find those screws in larger sizes (5mm and more) but I need small ones (3-4mm) for the controlpanels. Can you tell me if and where you guys get them from? Thanks. |
| shardian:
The byoac vendors sell black ones in two lengths. |
| Luigi:
I've been looking at divestar. edit: divemaster ::) --- Quote ---Happ black powder coated carriage bolts .25 each these are hard to get Carriage bolt 10-24 x 3’’ black Carriage bolt 10-24 x 2’’ black --- End quote --- To be honest, I don#t know what those measures mean? 3" and 2" ist the length I guess. But what means 10-24? What is the diameter of the screws? |
| shardian:
--- Quote from: Luigi on June 18, 2007, 09:45:50 am ---I've been looking at divestar. edit: divemaster ::) --- Quote ---Happ black powder coated carriage bolts .25 each these are hard to get Carriage bolt 10-24 x 3’’ black Carriage bolt 10-24 x 2’’ black --- End quote --- To be honest, I don#t know what those measures mean? 3" and 2" ist the length I guess. But what means 10-24? What is the diameter of the screws? --- End quote --- The 10-24 has to do with pitch and thread count. I believe the actual diameter of the thread portion of these is around the 3/16" you are wanting. Either way, they are direct replacements for the control panels I have done. |
| Havok:
You are correct - the 3" and 2" is the length. These are the standard diameter bolts for mounting joysticks and such. About the 10-24: The first number is the diameter, and the second is the threads per inch. There is a formula for determining what the actual diameter is, but a 10 is about 3/16 of an inch. Make sure if you order from DM that you specify you want the nut as well - I ordered a bunch a ways back and only got the bolt... *Edit* Shardian is a faster typist... ;D |
| Navigation |
| Message Index |
| Next page |