| Main > Main Forum |
| Where to get a vertical monitor for a nintendo cab?? |
| (1/2) > >> |
| swolgam:
Need to know the best place to get a vertical monitor for a nintendo cab. THanks, Steve |
| CheffoJeffo:
I dunno about the best place, but there are a couple of options. First off, I am going to presume that you want a Nintendo-compatible monitor because you are restoring a Donkey Kong or other Nintendo game using inverted video. If you are going to MAME it or put a non-Nintendo game in, the options are different and more plentiful. Used EZ-20 monitors aren't too hard to find (RGVAC or eBay, etc) and I have had good luck with them. Bob Roberts, ArcadeShop and others usually have spare flybacks and cap kits if you need to fix it up. If you want a new monitor to use with Donkey Kong, ArcadeShop has a converter board that is plug-and-play with a Vision Pro monitor (which they also sell). Info for Bob Roberts (aka The Real Bob Roberts) and ArcadeShop can be found in the vendors section of the BYOAC wiki: http://wiki.arcadecontrols.com/wiki/Vendors Cheers |
| BobA:
If you are using a 48 in 1 board then you need a standard arcade monitor not one made for nintendo. Only need a nintendo compatable one if you are using a DK or DK Jr etc pc board. |
| swolgam:
Probably going to go 48 to 1 |
| CheffoJeffo:
Then ignore everything I said ... ;) |
| Navigation |
| Message Index |
| Next page |