Main > Main Forum
No this is not what I wanted to happen
rovingmind:
Then you can fix it :applaud: always a good thing
smac666:
Ahh,
its amazing what you can't see for looking.
So I repaired the network resistor last night, and plugged the board back in and .... nothing.
Same thing as before, nuts.
Looking at the board again and notice that on the solder side right above the damaged resistor there are a couple of little feet sticking out but no component on the other side. You can see it at the missing item jpg at location FB1.
I guess when the damage occured it took the resistor out then totally removed the FB1 component. The sign on the board for it is a little loop the loop line. I looked at the rest of the board and there appear to be a few more on the board but they have no identifying marks on them at all. In missing iso 2.jpg pic the missing item is the one of the grey and blue squares near the jamma connector.
Anybody have any idea what it is??
Thanks
Steve
FrizzleFried:
Now...this was a WORKING BOARD prior to your little mishap? What size piece of wood fell through?
rovingmind:
he said the control panel, that would pack a hefty wallop
ChadTower:
He's still spinning his wheels without the schematic.
Rather than spend all sorts of time taking pics and asking people for help, get the schematic.