Main > Project Announcements

Project #2: Pac-man from scratch

<< < (6/15) > >>

knave:
As promised here's a picture of the monitor brackets.  They are "c" chanel steel. Didn't get a chance to measure them but it's safe to assume they are the same length as the inner cabinet width.

In the pict one is facing out and one is facing in.

amadama:
Thanks knave,
I'll try to make something like that. If not, I'll use a piece of MDF and cutout the space for the monitor.
I started my cutting today. Side panels are cut and I started putting in the wood blocks. I am beat!

Alex

Kaytrim:
I used a piece of MDF but I also gave the monitor a shelf to sit on.  To be on the safe side I'd suggest you go with what Knave used.  It will be more secure.

TTFN :cheers:
Kaytrim

amadama:
A shelf would be tough to put in on a Pacman machine. How big of a monitor is that in your tabletop machine?

Kaytrim:

--- Quote from: amadama on June 13, 2007, 10:31:26 pm ---A shelf would be tough to put in on a Pacman machine. How big of a monitor is that in your tabletop machine?


--- End quote ---
17" PC monitor in vertical mode.

Navigation

[0] Message Index

[#] Next page

[*] Previous page